Cisco is undoubtedly the most
trusted and reliable brand in the world of routers, and probably this is the
reason why users from all across the world prefer to use this. However, one
thing that keeps on bothering the users from all across the world is the
problem for retrieving the password for Cisco Router. Not only this, it has
become a common query amongst the users of all across the globe majorly because remembering passwords is a
tough task, and to retrieve it without losing the configuration is even more
tougher. So, if you also have similar queries, make sure that you have called
at Cisco support phone number to get
quick solutions. As an alternate option, you can follow the steps that are
mentioned-below in this blog. Take a look:
Step 1: In the first
place, attach the DB9 end of the standard light blue serial link to your serial
port. The flip side of the link ought to connect to the port named
"Console" on the back of the Cisco switch. On the off chance that you
don't have a serial port, then you'll have to go buy a USB-to-serial connector
link and introduce it on your PC.
Since your equipment is
associated, build up a serial association with the switch. The settings you
need are:
- Baud: 9600
- Data bits: 8
- Parity: No
- Stop bits: 1
- Flow Control: None
Step 2: On Windows, we
generally utilize putty for this association. Yes, putty can be utilized to
make serial associations and also telnet/ssh. Hyperterminal works extraordinary
also. On Linux, you have the option to utilize minicom and on FreeBSD/OpenBSD, you
can utilize (cu - s 9600 - l/dev/cuad0).
Step 3: Now, you are
required to reboot the switch, followed by pressing the Break key to interfere
with the boot sequence.
Step 4: In the next step,
make sure to type confreg 0x2142. This advises the switch to sidestep NVRAM
amid boot up. As such, you're existing sequence of configuration won't be
stacked. The uplifting news is that it won't be erased either.
Step 5: Type reset to
reboot the switch. Answer No when provoked to run setup.
Step 6: Type duplicate
begin run. This heaps your startup arrangement into memory. Presently, in the
event that you write a show run config, you'll see the switch sequence.
Additionally, you ought to notice that your switch name is presently in the prompts
rather than the default "Switch".
Step 7: Change the enable
secret by clicking on the option that says "empower secret new_password"
Step 8: Change the
registration again to 0x2102: config-enlist
0x2102
Step 9: At the point when
the switch reboots, it will stack the old setup with the new password
Step 10: Make sure that
you have saved the secret key with the goal that it will be relentless amid
reboots, type “copy run start”
Step 11: Reboot the switch
by writing reload at the enabled prompt.
If you are unable to get the
steps give here, you can directly contact the professionals by directly calling
them up at Cisco router tech support number. Just in case, if you don’t have this number, you must avail it from
the website of Contactforservice. It is an online directory that is famous for
enlisting numbers for all the USA and Canada-based customer services.
